Dm3 - Svenska 3D-Tåg

KMW · 2011-08-06, 13:00

Now we are talking!
Looks much more finished with the buffers in place.

Yes in deed the Norwegian NSB EL12 is the same type as Swedish Dm but then the mid section has to go,
the lights be back dated and the driver side door moved plus a number of other small differences to post date the engine.
Not impossible to do but some more work than just a repaint.

/æ

newS · 2011-08-08, 01:08

klick on the images to enlarge (full HD):

Fredrik1996 · 2011-08-08, 10:02

Awesome

Totte · 2011-08-08, 13:12

It´s very fine!
Look at the picture.

ocvn · 2011-08-08, 13:41

The two sections are not supposed to be that close as in the MSTS picture on El.12. At least not today, just in the very beginning (1950's). Only on the Dm/Dm3 the sections are supposed to be that close to each other.

Look here

Here you can see the "normal" gap between the sections

He has done just right, and it looks very good

Basse · 2011-08-08, 13:49

Great model!

KMW · 2011-08-08, 15:49

Fantastic model!
NSB added buffers so that they could make two 3-unit locomotives from three 2-unit locomotives.
This was in order to meet increasing train weights.
The same method had been used by both NSB and SJ on older locomotives also.
SJ and NSB choose different paths on EL12/Dm as SJ instead ordered new cabin less units type Dm3 to use with the older Dm units.

/æ

Mawkish · 2011-08-08, 23:35

Gotta give it to the Norwegians(for once) much better pick of color on their part

Looks amazing Swen, bloody good work!

newS · 2011-08-09, 02:03

Thanks

klick on the images to enlarge (full HD):

2011-08-08, 01:08	#2
newS Medlem Reg.datum: Dec 2007 Ort: Ostfreesland/Tyskland Inlägg: 580	Nsb el12 klick on the images to enlarge (full HD): __________________

2011-08-08, 10:02	#3
Fredrik1996 Medlem Reg.datum: Nov 2009 Ort: Tumba (Sweden) Inlägg: 547	Awesome __________________ MVH Fredrik1996 Jag har Aspergers syndrom.

2011-08-08, 13:49	#6
Basse Medlem Reg.datum: Jun 2004 Ort: Stockholm Inlägg: 797	Great model! __________________ /Tänk först. Tänk igen. Tänk igenom allt en gång till. Skriv sen.\\Basse

2011-08-08, 23:35	#8
Mawkish Medlem Reg.datum: Jul 2010 Ort: Uppsala Inlägg: 562	Gotta give it to the Norwegians(for once) much better pick of color on their part Looks amazing Swen, bloody good work! __________________ Försöker bygga Älvsjö godsbangård men svär mest över UVW mappning.

2011-08-09, 02:03	#9
newS Medlem Reg.datum: Dec 2007 Ort: Ostfreesland/Tyskland Inlägg: 580	Dm 838 / 839 Thanks klick on the images to enlarge (full HD): __________________

2011-08-06, 13:00	#1
KMW Medlem Reg.datum: Feb 2005 Ort: Karlstad, Sverige Inlägg: 988	Now we are talking! Looks much more finished with the buffers in place. Yes in deed the Norwegian NSB EL12 is the same type as Swedish Dm but then the mid section has to go, the lights be back dated and the driver side door moved plus a number of other small differences to post date the engine. Not impossible to do but some more work than just a repaint. /æ

2011-08-08, 13:41	#5
ocvn Medlem Reg.datum: Apr 2010 Ort: Kongeriket Norge Inlägg: 226	The two sections are not supposed to be that close as in the MSTS picture on El.12. At least not today, just in the very beginning (1950's). Only on the Dm/Dm3 the sections are supposed to be that close to each other. Look here Here you can see the "normal" gap between the sections He has done just right, and it looks very good

2011-08-08, 15:49	#7
KMW Medlem Reg.datum: Feb 2005 Ort: Karlstad, Sverige Inlägg: 988	Fantastic model! NSB added buffers so that they could make two 3-unit locomotives from three 2-unit locomotives. This was in order to meet increasing train weights. The same method had been used by both NSB and SJ on older locomotives also. SJ and NSB choose different paths on EL12/Dm as SJ instead ordered new cabin less units type Dm3 to use with the older Dm units. /æ