![]() |
Om det här är ditt första besök, se till att gå till vår FAQ (finns även länk till FAQ i navigeringsmenyn ovan). Du kan behöva att registrera dig innan du kan posta (finns även en länk till registrering i navigeringsmenyn ovan). För att titta på inlägg, välj det forum som du vill besöka från de som är listade nedan. |
|
![]() |
|
Ämnesverktyg | Visningsalternativ |
|
![]() |
#1 |
Medlem
Reg.datum: Dec 2007
Ort: Ostfreesland/Tyskland
Inlägg: 580
|
![]()
If a route-creator need specially signs, he must me send a PM or eMail. I then make this...
I mean this signs: |
![]() |
![]() |
![]() |
#2 |
Medlem
|
![]()
Words cannot describe the awesomeness of these objects!
Good work ![]() ![]()
__________________
UVW = Usch, Vilket Wansinne ![]() |
![]() |
![]() |
![]() |
#3 |
Tidigare Ruben
Reg.datum: Oct 2008
Ort: Stockholm
Inlägg: 2 907
|
![]()
När jag la in järnvägsövergångarna så krachade KRS. Kan jag göra något?
![]() |
![]() |
![]() |
![]() |
#4 | |
Medlem
Reg.datum: Dec 2007
Ort: Ostfreesland/Tyskland
Inlägg: 580
|
![]() Citat:
On the Test-Demo-Route or on your own route? |
|
![]() |
![]() |
![]() |
#5 | |
Tidigare Traindriver94
|
![]() Citat:
When I have placed out the "orienteringstavla" and some "hastighetstavlor" and I was going to test and driver, the game crashed. It was on my own route..
__________________
Mina arbeten i Trainsimulator 2012: Appleford - Slough Färdig Bergslagsbanan V2.0 Färdig! Bergslagsbanan V3.0 Under arbete! |
|
![]() |
![]() |
![]() |
#6 | |
Medlem
Reg.datum: Dec 2007
Ort: Ostfreesland/Tyskland
Inlägg: 580
|
![]() Citat:
If I put signals or rail crossings on the route and press the play-button, then I have crashes. But not always. The same if I going to the rolling-stock-edit-mode. But the RS save the changes and after the next start of the KRS, the route works properly. Also, if you put new signals and/or change the links, you must exit the scenario and new load the scenario. Tipp: If I work on my route, I save over and over again. 1) I press on top on the Loco-symbol. 2) then comes a question to save - I say ok 3) on the next question - I say no. Then I go on working. If I will test the changes and will play, and I have a chrash, I restart the RS, load the scenario, and all it's ok. ![]() A friend of me also have vista. He has crashes, only he has installed the MK2-update. Now he has only installed the MK1-update and he's KRS work. Senast redigerad av newS den 2009-06-10 klockan 20:07. |
|
![]() |
![]() |
![]() |
#7 |
Tidigare Traindriver94
|
![]()
Yes, everything saves, so it's not a problem
![]()
__________________
Mina arbeten i Trainsimulator 2012: Appleford - Slough Färdig Bergslagsbanan V2.0 Färdig! Bergslagsbanan V3.0 Under arbete! |
![]() |
![]() |
![]() |
#8 |
Medlem
Reg.datum: Nov 2006
Ort: Finland
Inlägg: 99
|
![]()
newS, I was wondering, can you make more signal variations, like without reflexes on the signals?
![]() Signals withouh reflexes And what about AGA bell? ![]() AGA Bell Sounding Level Crossing with different crossbucks |
![]() |
![]() |
![]() |
#9 | |
Tidigare Ruben
Reg.datum: Oct 2008
Ort: Stockholm
Inlägg: 2 907
|
![]() Citat:
![]() |
|
![]() |
![]() |
![]() |
#10 | |
Tidigare Traindriver94
|
![]() Citat:
That would be easier for you, so you don't have to make signs to everyone. Sorry for my bad bad english
__________________
Mina arbeten i Trainsimulator 2012: Appleford - Slough Färdig Bergslagsbanan V2.0 Färdig! Bergslagsbanan V3.0 Under arbete! |
|
![]() |
![]() |
![]() |
#11 |
Medlem
Reg.datum: Dec 2007
Ort: Ostfreesland/Tyskland
Inlägg: 580
|
![]()
This is not possible.
|
![]() |
![]() |
![]() |
#12 |
Tidigare Traindriver94
|
![]()
Thats too bad =/ Stupid of Kuju not to do like that.
Well well
__________________
Mina arbeten i Trainsimulator 2012: Appleford - Slough Färdig Bergslagsbanan V2.0 Färdig! Bergslagsbanan V3.0 Under arbete! |
![]() |
![]() |
![]() |
#13 |
Tidigare v10
Reg.datum: Nov 2005
Ort: Halmstad
Inlägg: 2 513
|
![]()
i finaly made RS work without MK2 and wow! these contents are fantastic! thank you for going that extra mile!
![]() |
![]() |
![]() |