[WIP] Jönköpingsbanan

[Totte]

Ursprungligen postat av Pinocchio

Hello everyone, I want to ask you an important question here, why all my Jörköpingsbanan v 1.0 route add-on track components are inexplicably lost or disappeared in the game, as shown in the figures below, I hope you can help me solve this important technical problem here. What needs to be explained here is that I have installed everything in full accordance with the installation instructions of the route add-on, that is, first I installed a series of necessary support add-on files(such as relevant payware and freeware routes add-on, landscape/scenery objects add-on, locomotive and rolling stock add-on and the related others in the game), then I installed the route add-on itself. And because a download website is not available any more, I hope you can leave me this landscape/scenery object add-on or its reliable download address link here: Renault Kangoo v1.0. Well, I am waiting for your friendly reply on it here/I am looking forward to your reply on it here, thank you first, and all my best wishes/greetings to you! See you. Good luck *^_^*

Hello!
These are the tracks that require the Altenburg to Vildau route.
Download here: https://rail-sim.de/forum/filebase/e...wildau-v-3-12/

Hope you get to see the tracks!

[Hgv]

Ursprungligen postat av Pinocchio

Thanks a lot for the prompt reply from the original author of this route here! It seems that I can't run this route add-on on my PCs due to its x64 bit version, and Railworks/TrainSimulator program is running with v74.8a version at present meantime/meanwhile. Anyhow, I already know why this is the case or what's happening on it. After all, it also involves complex and specific technical issues. Thank you for your enthusiastic reply on it! Here, I also sincerely wish all your route building work(including landscape/scenery objects deployment for this route add-on) will be completed successfully/smoothly, as well I sincerely wish our Railworks/TrainSimulator program business can develop better and better, and bring us much more joy and pleasure! And all my best wishes to you! See you. Good luck

Unfortunately I am also unable to run the route in the latest TS version, both 32 bit and 64 bit.

If I disable certain signals, it's possible to start the route. It seems that the latest TS version is unable to handle some signals or combinations of signals that has worked fine in previous versions.

[Pinocchio]

Ursprungligen postat av Totte

Hello!
These are the tracks that require the Altenburg to Vildau route.
Download here: https://rail-sim.de/forum/filebase/e...wildau-v-3-12/

Hope you get to see the tracks!

Well, thanks a lot for your reply, I appreciate your help and guidance here. And all my best wishes/greetings to you! See you. Good luck

[Pinocchio]

Ursprungligen postat av Hgv

Unfortunately I am also unable to run the route in the latest TS version, both 32 bit and 64 bit.

If I disable certain signals, it's possible to start the route. It seems that the latest TS version is unable to handle some signals or combinations of signals that has worked fine in previous versions.

Well, that's it. I hope that you will be able to take up with specific and feasible solutions in the future to solve this technical problem gradually and effectively, so that this spectacular real-world route add-on can be finally recoverable. And all my best wishes/greetings to you! See you. Good luck

[Pinocchio]

Ursprungligen postat av Totte

Hello!
These are the tracks that require the Altenburg to Vildau route.
Download here: https://rail-sim.de/forum/filebase/e...wildau-v-3-12/

Hope you get to see the tracks!

By the way, do you have/possess this landscape/scenery object add-on: Renault Kangoo v1.0 for Jönköpingsbanan v 1.0 route add-on of Railworks/TrainSimulator Classic program? The original download address link has expired already, and I can't find more available address links anyway at present. So I beg you: If you have/possess this landscape/scenery object add-on on your PCs, can you provide/leave me this landscape/scenery object add-on here? If this is the case, it would be great. Thank you very much, thanks a lot for your great assistance, and all my best wishes/greetings to you! Take care. Good luck

[Hgv]

Rutten fungerar i 32 bit om man installerar och kör en äldre version av TS. Jag följde instruktionerna i länken nedan och kopierade över Assets och Content till den "nya" installationen.

The route works in 32 bit if you install and run an older version of TS. I followed the instructions in the link below and copied Assets and Content to the "new" installation.


https://forums.dovetailgames.com/thr...-to-tsc.71041/

[Tarik Pasic]

Ursprungligen postat av Hgv

Rutten fungerar i 32 bit om man installerar och kör en äldre version av TS. Jag följde instruktionerna i länken nedan och kopierade över Assets och Content till den "nya" installationen.

The route works in 32 bit if you install and run an older version of TS. I followed the instructions in the link below and copied Assets and Content to the "new" installation.


https://forums.dovetailgames.com/thr...-to-tsc.71041/

In my case, the old Jonkopingsbanan route works fine in 32 bits but the newer Jonkopinsbanan from 2020 doesn't work at alll... Are you still working on this route?

[Hgv]

I'm no longer working on the route as it's not working in the later versions of TS. I've been trying to figure out why exactly this is; I understand it's a problem with signal scripts so perhaps it's possible to clean up the scripts, but my knowledge is too limited. I posted about it here: https://forums.dovetailgames.com/thr...updates.82307/

As mentioned above, you can get the latest version of the route to work if you install an older version of TS. This can be kept in a separate location in case you want the current TS version as well.

[Tarik Pasic]

Ok fair enough, that's really unfortunate, there's been a lot of problem on Swedish routes due to 32 bits versus 64 bits and now apparently signals and scripts too... Have you tried to talk to DTG management about this? Do you have a picutre of the route version from 2020? I want to see if it's the same version as the old (original) Jonkopingsbanan from Banbyggarna.

[Hgv]

This is the latest version: http://www.e-buzz.se/forum/showpost....5&postcount=25

The one on Banbyggarna is a very old version. It may be that this version works as it's a lot less complex with less signalling and it doesn't include any of the layout around Stockholm which I have included in the later versions (in hindsight that should probably have been a separate route...).

I would suggest if you want to run the route to make a separate installation of an older TS version as explained previously. Alternatively you can try to disable certain signals, but you may still run into problems e.g. when a train activates a crossing signal. With the old TS version the signals should work predictably with no crashes.

In the DTG forums I have tried to raise the issue of scripts causing crashes in the later TS versions but I haven't received any official response. I'm not sure if there is another way to contact DTG about it.

[Tarik Pasic]

Ursprungligen postat av Hgv

This is the latest version: http://www.e-buzz.se/forum/showpost....5&postcount=25

The one on Banbyggarna is a very old version. It may be that this version works as it's a lot less complex with less signalling and it doesn't include any of the layout around Stockholm which I have included in the later versions (in hindsight that should probably have been a separate route...).

I would suggest if you want to run the route to make a separate installation of an older TS version as explained previously. Alternatively you can try to disable certain signals, but you may still run into problems e.g. when a train activates a crossing signal. With the old TS version the signals should work predictably with no crashes.

In the DTG forums I have tried to raise the issue of scripts causing crashes in the later TS versions but I haven't received any official response. I'm not sure if there is another way to contact DTG about it.

Yes I've been trying to work with that 2020 version, unfortunately your 2019 versions are no longer available (maybe they would work without any signals or scripts issues). Unfortunately, when I delete the signals and scripts, I am able to access the route BUT I only get the Stockholm area portion of the route and not the Jonkopingsbanan part, for some reason. I like the version on Banbyggarna but it's indeed very old and also quite short ("only" 23 kilometers). Is your version of the route longer? Do you happen to have a 3D map somewhere maybe?

When it comes to other forums, I know a guy who is very good at fixing issues on route. Unfortunately, I recently had him fix something for me so I don't necessarily feel comfortable asking him for help again so quickly but let's see, I can talk to him about your route eventually if you want.