Thanks Joakim:)
I try all the car Sbb EW A,AB,B,C.. It s wonderful very realistic
You have a fan:)

But now for the SBB Re 4/4 1 I have three Kuid who miss now ahah
enginespec <kuid:67375:101211>
hornsound <kuid:67375:100970>
interior <kuid:67375:101218>

If anybody has this kuid:) Thanks for all

Loïc Schweizer

Ahh, I see, first link in this thread is dead (LENNART: om du säger vad som ingår i den så kan jag ladda upp den på obegänsad tid på mitt webbhotell). I've uploaded it here:

http://jowahlen.se/trainz/lan/SBB%20...4%20Assets.cdp

INCLUDES:

• Sj Du Tyfon,<kuid:67375:100970>
• SBB Re 4/4 I FHytt 3.1.1,<kuid:67375:101218>
• Rc1 Engine,<kuid:67375:101211>

:)

SBB Re 4/4 Complete and fixed
 

All Assets for SBB Re 4/4 are temporarely on my Dropbox, but my be removed!
The Cabin is now fixed and is manually drivable in CAB-mode! All regulators are now working in the order Panto UPP - Reverser forward - ThrotteBrake turn. The Wiper switch is reachable if you change view once - turn it - change view back. Changing Cab direction by Alt-C.

(Jockes are welcome to host this on his web hotel!!!)

I built this Swiss loco and wagons because my dad baught it when I was 10 years old 1955, in east Berlin for very little Money.


Here are the loco complete:

Re 4/4 Assets:

https://dl.dropboxusercontent.com/u/...4%20Assets.cdp

Re 4/4 Cabin:

https://dl.dropboxusercontent.com/u/...Hytt%203.1.cdp

Re 4/4 Loco:

https://dl.dropboxusercontent.com/u/...04_4%20STL.cdp

Hello,
Waou thanks you for your answer:)
I try no more problem with kuid ans I found very good made all your carriage and the engine, you are a good Creator :)

I just notice something with your SBB EW I D1 but not very important. There is no ground in the wagon . When the door open, you see the tracks:)

thanks for your creation

I have made a mistake

grusse tigerli

Good of you to Point this out! I lost all my max-files some 2 years ago when my computer burned, and now I've lost even 3Dmax(and can't afford to update it :mad:) and trying to do some repair work in gmax and it went quite well with the inner floor of EW 1D :grin:

So here is the "not bottomless version":

Thanks you. No more problem yet
Now all is tip top :)

Have you another locomotive or carriage for Swiss program to built?:)
I am curious ahah

Loïc

Hello I would to have this train
 

Hello dears trainz simmers,

I would to have this historic Swiss train could you give me the links where to download it ?

Thank you so lot.

Serge

Lennart.

Jag tog en titt på grejerna, nu på morgonen.

I TS2010 så har SBB EW I D1 ett rött utropstecken. Allt annat OK i TS2010.

Gjorde cdp-filer utav lok, vagnar och annat tillbehör, men hoppade över själva basgrejerna. så som STL Koppel, STL Script Library, STL Trainz Monitor och Brygga bälg bibliotek och installerade sedan i Tane.

I Tane, så dök dessa fel upp.

Noterbart är att felet på SBB EW I D1 från TS2010 är borta i Tane, men att den har samma fel som övriga vagnar i Tane med bälgen.

Edit. Brygga och inte bälg.

Ja Bengan,
jag noterade detta och har fixat det.
Skall kolla med Korvtiger om vi kan lägga det på vår hemsida så våra scheweiziska vänner kan ladda ner det.

(Skall även kolla min vers. av Ce 8_8 Krokodilen så småningom.

Lan är det en WRmh som jag ser i backgrunden??

Nej, det är ett målarplank som nån kladdar på !

It has been faulty in TANE but I'm working on fixing this, as well as the Ce 6/8 Krokodil ( constucted in 3 parts to follow the track ).

Theese will be available in some way when ready, and will be linked from this thread.

http://www.banbyggarna.se/stl/lok/ellok/page1.html


http://www.banbyggarna.se/stl/vagnar...nar/page1.html